Thu, 8 January 2009 Post By Online Shopping Store
Threadlocker Adhesives are standard in the assembly of everything from delicate electronic components and critical aerospace systems to heavy construction equipment. Product no.: 222 Typical Use: Small screws under 3/4" bolts Color: Purple Viscosity cP: 1,2000/5,000 Gap Tool: Thixotropic Torque in pounds (M10 steel nuts and bolts) break/prevail: 53/30 Temperature range: -65°F to 300°F Cure Speed, Steel @ 25°C: Fixture: 20 min.; Full: 24 hrs. Recommended Primer: N or T 10 ml bottle |
"PERMATEX" BEARING MOUNT
Low viscosity, rapid curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" in diameter.
Adds up to 3,000 psi holding power.
Primary applications: bushings, bearings, oil seals, ring gear bolts, differential lock pins, etc.
250 ml bottle.
Cross Reference: 60925 |
"PERMATEX" BEARING MOUNT
Low viscosity, rapid curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" in diameter.
Adds up to 3,000 psi holding power.
Primary applications: bushings, bearings, oil seals, ring gear bolts, differential lock pins, etc.
50 ml bottle.
Cross Reference: 60950 |
DuraTrax has designed this bottle of Pit Tech Thread Locking Compound to be used on metal fastners. It is not recommended for plastic parts. INCLUDES: One bottle of DuraTrax Pit Tech Pro Threadlocker SPECS: Weight: .2 ounces (5.5 grams) FEATURES: Medium strength general purpose thread locker Locks threaded fastners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip |
Applications: Ignition Component Screws, Fuel Pump Screws. Prevents Rust Lock And Loosening From Shock And Vibration. Blue.Tags : Threadlocker
7054
|
- This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as the traditional threadlocking liquid, Loctite 242 Blue threadlocker. This wax-like stick is conveniently packaged in a self-feeding stick applicator.- Well suited for difficult repairs, as in overhead applications.- It can be applied to a part even if assembly is to take place at a later time, making the stick ideal for volume assembly.- Removable with hand tools. |
Loctite 271 Red is a high-strength threadlocker for heavy-duty applications. Especially wel-suited for permanentlylocking studs and press fits. adds 3000 psi holding poweron slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Removable with heat and hand tools. For fasteners up to 1" (25mm) in size. Suggested applications: Frame brackets suspension fasteners shock absorber mounts wheel studs. |

